DeltaIV-600: 101 x 152 mm (4"x 6")
Other lengths available
Improving on traditional self-centring vices, Delta IV is a family of "fixed-centring" multi-axis vices that decouples locating and clamping. Jaw location on the 1st and 2nd axes is provided by serrations on a hardened steel base and matching serrations on a fixed jaw. Clamping force is provided with a fast-acting, high strength steel screw.
The heart of the vice is the patent-pending Delta jaw-retention system, which provides pull-down force and locating on the 3rd axis.
The net result is significantly better rigidity and accuracy - especially well suited for secondary operations, often neglected with self-centring vices.
Features & Specifications
What's Included
Mounting Options
Base Material | Hardened steel, HRC 55-60 Surface ground on two sides |
Fixed Jaw | Located on 1/16" serrations for 1/8" centre line adjustments 0.0005" repeatability |
Anti-Jaw Lift | Patent pending DELTA design < 0.001" for first operations < 0.0005" for second operations * * Soft jaws should be machined such that the bottom of the workpiece sits no higher than 0.875" - 1.000" above the bed of the vice |
Clamping Force | 3200 lbs (40 ft-lbs torque) recommended clamping force with serrated grippers 4800 lbs (60 ft-lbs torque) recommended clamping force with aluminum soft jaws 8000 lbs (100 ft-lbs torque) max clamping force with steel jaws |
Manufacturing | 100% Made in USA |
Body | Delta IV Compact vice body 149 x 101 x 49mm (5.88 x 4.00 x 1.937) | |
Carrier Assembly | Delta IV Carrier Assembly for 6" length vice | |
Included Jaws | Type A Master Jawset with hardened steel gripper strips | Type A Capacity Diagram for Serrajaws (PDF) Type A Capacity Diagram for Piranha Jaws (PDF) |
Optional Jaws | Type B Master Jawset | Type B Capacity Diagram for Serrajaws (PDF) Type B Capacity Diagram for Piranha Jaws (PDF) |
Optional Machinable Jaws | Your choice of steel or aluminum 101mm (4") or 152mm (6") lengths Various heights available soon Use these for flat-faced clamping by machining a step into each jaw |
Ball Coupler / Delta Zero Interface (default) | Couplers and pull studs sold separately | PDF Coming Soon |
Basic Bolt-On | ||
SMW Bolt-On | Fits Saunders Machine Works subplates 1.25" grid pattern Fits standard 1/2" dowel pins @ 0.5003" diameter Does not fit Orange Vise 1/2" dowel pins @ 0.4993" diameter | |
Haas T-Slot Platter: 127mm (5.0") PCD at 60-degree spacing | HRT210, HRT160, TR160 3/8" SHCS | |
Haas TRT160 with tapped platter | 140mm PCD at 60-degree spacing 3/8" SHCS | |
Matsuura MAM72, Cublex-25, Cublex-35 | INCH specification 3.8" PCD at 90-degree spacing 1/2"-13 or M12 SCHS | |
52mm Universal | PDF Coming Soon |